hello, welcome to guangzhou qingqin yu official website!
NEWS
News
Contact Us
Guangzhou Qing Qin Yu Environmental Protection Technology Co., Ltd.
Sales Center: Room 1010, South Tower, Xindacheng Plaza, 27 Erheng Road, Shuiyin Road, Yuexiu District, Guangzhou
Fax: 020-38989166
What problems should be paid attention to when using the trowel?
Release time:
2023-11-10 16:45
If you want to make good use of the polishing machine, you must understand the blade, its quality is directly related to the effect of concrete polishing. Sparing machine spatula is often used with the concrete surface friction, after a period of time will inevitably produce wear, so the general use of a period of time to replace the blade.
When we choose, we must first look at the material of the blade. If the material is too soft, it will easily deform during use, which will cause unevenness. So we must choose those materials with high rigidity.
And to choose those materials wear-resistant blades, because the friction of concrete is large, if the blade is not wear-resistant, it will cause the blade to be damaged if it is not used for a long time. It is also necessary to ensure that the size of the blade is basically the same, and the balance must be maintained when rotating.
Sour machine operation matters needing attention:
1. Before use, check whether the motor, electrical switch, cable and wiring are normal and meet the requirements, and install the leakage protector.
2. Check and clean up the debris on the smearing tray before use to avoid the whole machine beating during use.
3. After the power is turned on, the test run shall be carried out. The blades shall rotate clockwise and shall not be reversed.
4, the operator should wear insulating shoes, wear insulating gloves, cable by the auxiliary personnel, auxiliary personnel should also wear insulating shoes and wear insulating gloves. Take care to prevent electric shock caused by the insulation of the cable.
5. If the wiping machine fails, it must be shut down and cut off the power supply before maintenance.
6. The finishing machine should be stored in a dry, clean and non-corrosive gas environment, the handle should be placed in the specified position, and the transfer should not be rough loading and unloading.
No matter what kind of smoothing machine, we must pay attention to these operational matters, to ensure construction safety, reduce unnecessary loss. The construction speed is faster and the operation is more convenient. The important thing is that the ground effect is more uniform, smooth and beautiful.
Previous Page
Next Page
Previous Page
Next Page
Related News
WeChat Public Number
Business Contact
WeChat Public Number
Business Contact
Copyright©2023 Guangzhou Qing Qin Yu Environmental Protection Technology Co., Ltd.
