NEWS

News

Contact Us

Guangzhou Qing Qin Yu Environmental Protection Technology Co., Ltd.


Sales Center: Room 1010, South Tower, Xindacheng Plaza, 27 Erheng Road, Shuiyin Road, Yuexiu District, Guangzhou



Fax: 020-38989166





Why is it necessary to clean the grinding discs after curing and repairing with a floor grinder?

Release time:

2023-11-10 16:51

During floor grinding operations, after each pass of the grinder, the worn-out grinding discs must be thoroughly cleaned. This prevents irreparable scratches from forming on the floor surface if grit becomes trapped inside the discs during subsequent work—especially important during the curing process. Remember to clean the discs promptly after any repairs have been made to the floor.
As a dust-free construction process specifically designed for floor hardening applications, when repairing the surface, if you choose to use "grinding methods" with patching agents and repair mortars, the grinding discs will inevitably pick up traces of these materials—or even residual repair compounds. These residues must be cleaned off promptly; otherwise, once they’ve dried completely, they’ll become extremely difficult to remove. Moreover, if overlooked, using these contaminated grinding discs on the floor could lead to irreversible damage, potentially making the repairs impossible or requiring significantly more time and effort to rectify, thereby adding unnecessary headaches to the flooring project.
So, after performing curing and repair with the floor grinder—especially during grinding and patching—remember to inspect and clean the metal grinding discs.
 
Guangzhou Qingqinyu Environmental Technology Co., Ltd. provides the MTC grinders you need—products that are both effective and perfectly suited to your requirements. Feel free to reach out for more information!
 
Contact: Ms. Wu
 
Phone: 86 020 38989152
 
Mobile phone: 13925069066
 
Fax: 86 020 38989166
 
 
 
 

Related News