hello, welcome to guangzhou qingqin yu official website!
NEWS
News
Contact Us
Guangzhou Qing Qin Yu Environmental Protection Technology Co., Ltd.
Sales Center: Room 1010, South Tower, Xindacheng Plaza, 27 Erheng Road, Shuiyin Road, Yuexiu District, Guangzhou
Fax: 020-38989166
Maintenance of epoxy floor
Release time:
2023-11-10 16:51
After the epoxy floor is completed and delivered, it should be maintained and cleaned to ensure that the workshop environment is clean and tidy, and truly achieve a clean production environment. At the same time, the daily ground maintenance work included in the daily management system, is conducive to prolong the service life of the floor, reduce the renovation rate, to ensure the smooth progress of production, floor maintenance and equipment maintenance is equally important, the following is some of the main matters of floor maintenance:
1, the ground such as sand, mud, debris should be promptly swept clean, so as to avoid its grinding damage to the ground, to prevent hard, sharp objects directly friction ground.
2. Employees should change soft-soled shoes before entering the production area; (plastic) carpets are set at the junctions and entrances where sand and mud are easy to be brought in, so as to facilitate employees to remove sundries on soles when entering and leaving. Epoxy floor normal use temperature below 100 ℃, so, for often need welding or oxygen cutting area, should be laid on the ground high temperature isolation pad.
3, forklift, forklift unloading pay attention to the goods flat, should be on the ground high temperature isolation pad, to avoid the goods side nephew, drag scratch the ground.
4. Try to avoid emergency braking when vehicles, forklifts and forklifts are running. The casters of all kinds of carts or trailers must be made of rubber and soft materials with wide stress surface and certain elasticity. They need to drive slowly and avoid sudden braking or sharp turns.
5. All hard objects: such as iron chairs, iron tables, iron shelves, etc., must wrap their feet with soft plastic or rubber to avoid scratching the ground during use; the locomotive must fully lift the board off the ground. Please pay special attention to the corners of the board not to scratch the ground when turning;
6, often oil leakage parts, with sawdust often clean, so as to avoid oil denaturation, adsorption of ash layer, become stubborn stains. Large area of oil immersion area, available wide cloth mop, push the sawdust dry floor oil. The corrosive chemicals and solvents spilled on the ground should be removed immediately. For the grease spilled on the ground must be removed immediately, otherwise the ground will become slippery, easy to cause damage.
7. On the ground of the machine console, heavy raw materials, semi-finished products or finished products storage area, it is best to lay rubber pads or soft plastic pads.
8, the ground needs regular maintenance and cleaning, can make the ground to maintain beautiful clean, can also remove the ground may exist, will scratch paint hard particles. When cleaning the ground, please use a soft mop or a wet and dry vacuum cleaner, which can be cleaned with water or detergent (corrosive weak), but please pay attention to the slippery ground; 9. Before the equipment enters the factory, lay the cushion on the floor to avoid scratching the ground during transportation of the equipment.
Related News
WeChat Public Number
Business Contact
WeChat Public Number
Business Contact
Copyright©2023 Guangzhou Qing Qin Yu Environmental Protection Technology Co., Ltd.
