Mei Teng Qi MD-300 Wood Floor Grinder

Product Description: It has the functions of smoothing, polishing and vacuuming. At the same time, all dust will automatically enter the cloth bag without cleaning the ground and no pollution.

Key words:

Ground grinding machine

Telephone:

Online consultation
  • Product Description
  • 美腾奇MC300E地坪打磨机
     

    Cement floor grinding

       1Installation #24#Emery paper can polish the mortar layer on the cement floor, and ash is automatically sucked into the cloth bag to make the ground smooth and frizzy. The approved putty is easy to penetrate the depth of the ground, enhance the winding and adhesion between the paint and the ground, and the paint is not easy to fall off and peel.

       2. Particles or bubbles will appear on the surface of the batched putty. Change to 80# on the drum#Or 100# sand skin can replace artificial play greasy, the effect is high, the effect is good, especially to do self-retaining flat or epoxy resin floor engineering, the surface effect is better.

     

    Polishing of plastic track and stadium


       1.Installation #24#Just sandpaper can polish the recycled rubber particles at the bottom of the composite plastic, making the rubber particles more solid and compact. The surface is smooth and frizzy, which is convenient for the adhesion of rubber and particles.

       2.If the old plastic field particles have fallen off, use 24#Emery paper polishing treatment, so that the surface of the old plastic site smooth frizz, and then re-paved plastic, excellent adhesion.

     

    Dealing with Stain Grinding on Hard Surfaces


       1.Mount 24# on the grinding cylinder#Emery paper can be polished to remove plaster, cement and other residues left on the ground due to construction or decoration.

       2.Can remove polished, old factories, warehouses, basketball courts, as well as various sports venues on the surface of the oil, paint, so that the ground clean as new, easy to secondary ground decoration.
       3.
    Use 24# emery paper to polish more than 3 square meters of steel plate to remove rust, and use 100# emery paper to refurbish and polish.

     

     Product characteristics:

     

    Meitengqi automatic dust collection floor polishing machine has wood floor, epoxy resin, cement floor roughening, floor paint particles, plastic runway, rubber and plastic board, PVCGround, polishing and dust collection; All kinds of metal plate rust polishing and other functions;
    Mei Tengqi automatic vacuum floor polishing machine for laying a variety of floor, floor grinding, polishing, dust can be completed at one time, grinding out the floor smooth, greatly improve the work efficiency, reduce the labor intensity, is the necessary equipment for decoration, floor industry;

     

    Automatic vacuum floor polishing machine features:

     

    1The operation is simple, safe and reliable, the polishing machine is equipped with emery cloth, standing operation is not afraid of nails, as long as push a few circles, the ground immediately flat and smooth;

    2It has the functions of edge grinding, edge polishing and edge vacuuming. At the same time, all dust will automatically enter the cloth bag without cleaning the ground and no pollution;

    3High efficiency, fast speed, low noise, time-saving and labor-saving, can be used continuously, is the only advanced equipment for the production of ground;

     

     

     

    Installing sandpaper
     
     
    1. Open the front cover, turn the roller to expose the chute for clamping the abrasive belt, and insert the 10MM Allen wrench into the adjusting rod on both sides
     
    Screw female inner hole (wrench must be inserted to the bottom), and rotate counterclockwise until the belt chute is opened to the maximum
     
    Voids.
    2. Smooth and evenly cover the cut abrasive belt on the roller, and evenly insert two sections of the abrasive belt into the chute where the abrasive belt is clamped.
     
    It is better to be inserted directly into the abrasive belt and roller without gap. At this time, use an Allen wrench to check whether the oblique notch of the sandpaper is relatively high.
     
    form a straight line.
     

     

    Technical parameters:

    Brand

    Meichenge

    Meichenge

    Model

    MD-300A

    MD-300B

    Type

    Hand-push sander

    Hand-push sander

    Working principle

    roller polishing machine

    roller polishing machine

    Power supply type

    AC power supply

    AC power supply

    Voltage (V)

    220

    380

    Rated input power (KW)

    3

    3

    Diameter of polishing wheel (mm)

    300

    300

    No-load speed (rpm)

    1880

    1880

    Return speed (rpm)

    1880

    1880

    Output power (kw)

    3

    3

    Variable speed mode

    stepless speed change

    stepless speed change

     

Since the establishment of Guangzhou Qing Qinyu Environmental Protection Technology Co., Ltd., it has practiced the energy-saving and environmental protection concept of "Beautiful China", adhered to the service tenet of new technology, high standards, and excellent quality, and took the provision of healthy, safe and environmentally friendly products as its own responsibility, technology introduction and independent Research and development are equally important, on the basis of German technology, close cooperation with domestic and foreign scientific research institutions and universities, successfully launched in line with market demand, excellent performance of the "Meitengqi" brand of high-tech energy-saving and environmental protection products.

Online Inquiry

Submit RFQ