NEWS

News

Contact Us

Guangzhou Qing Qin Yu Environmental Protection Technology Co., Ltd.


Sales Center: Room 1010, South Tower, Xindacheng Plaza, 27 Erheng Road, Shuiyin Road, Yuexiu District, Guangzhou



Fax: 020-38989166





A Strong Leadership Group Leading the New Era, New Journey and New Glory -- A Documentary of the Production of the Party's New Central Leadership

Release time:

2023-11-10 16:45

 

xinhua news agency, beijing, October 24thTopic: a strong leading collective leading the new era, new journey and new glory -- a record of the emergence of the new central leading body of the party

 

Xinhua News Agency reporter

 

After a century of glorious history and a new journey of the times, the great Communist Party of China has ushered in a landmark moment of great historical significance--

On the morning of October 23, 2022, the Great Hall of the People in Beijing.

In the warm applause, the first plenary session of the 20th CPC Central Committee elected the political Bureau of the 20th CPC Central Committee composed of 24 members. Xi Jinping, Li Qiang, Zhao Leji, Wang Huning, Cai Qi, Ding Xuexiang and Li Xi were elected members of the standing Committee of the political Bureau of the CPC Central Committee, elected Xi Jinping as general secretary of the Central Committee, adopted the members of the Central Secretariat, and decided on the members of the Central military Commission; and approved the leading body elected by the first plenary session of the 20th central commission for discipline inspection.

 

On October 23, Xi Jinping, general secretary of the CPC Central Committee, who was just elected at the first plenary session of the 20th CPC Central Committee, and Li Qiang, Zhao Leji, Wang Huning, Cai Qi, Ding Xuexiang and Li Xi, members of the Standing Committee of the Political Bureau of the CPC Central Committee, met cordially with Chinese and foreign journalists covering the 20th CPC National Congress in the Great Hall of the People in Beijing. This is an important speech by Xi Jinping. Photo by Xinhua News Agency reporter Li Xueren

Fenji was just then, and set sail again.

The new central collective leadership with Comrade Xi Jinping at the core unites and leads the whole party, the whole army and the people of all ethnic groups throughout the country, is confident, self-reliant, upright and innovative, and moves forward vigorously and courageously towards the grand goal of building a modern socialist country in an all-round way and promoting the great rejuvenation of the Chinese nation in an all-round way.

 

Pilot at the helm, create a great cause of revival

General Secretary Xi Jinping is at the helm to lead the new era and new journey, winning the heartfelt respect and support of the whole party, the whole army and the people of all ethnic groups throughout the country, and the whole party firmly supports the "two establishment" and resolutely achieves the "two maintenance"

 

 

On October 23, Xi Jinping, general secretary of the CPC Central Committee, who was just elected at the first plenary session of the 20th CPC Central Committee, and Li Qiang, Zhao Leji, Wang Huning, Cai Qi, Ding Xuexiang and Li Xi, members of the Standing Committee of the Political Bureau of the CPC Central Committee, met cordially with Chinese and foreign journalists covering the 20th CPC National Congress in the Great Hall of the People in Beijing. This is Xi Jinping waving to the presence of Chinese and foreign reporters. Photo by Xinhua News Agency reporter Pang Xinglei

On the dial of time, there are always some dazzling moments that mark the course of history.

In the golden autumn of 2021, in the warm atmosphere of the Communist Party of China solemnly celebrating the 100 anniversary of the founding of the party, our party formulated the third historical resolution in the party's history, which clearly put forward the "two establishment"--

The party established the core position of Comrade Xi Jinping's Party Central Committee and the core position of the whole party, and established the guiding position of Xi Jinping's thoughts on socialism with Chinese characteristics in the new era. It reflects the common aspirations of the entire party, the entire army and the people of all ethnic groups in the country. It is of decisive significance to advance the historical process of the great rejuvenation of the Chinese nation.

This is a major historical conclusion drawn from a profound summary of the party's century-old struggle, especially the great changes in the new era, to unite the common will of the whole party and express the common aspirations of the people.

The five years since the 19th National Congress of the Communist Party of China are extremely unusual and extraordinary. The CPC Central Committee coordinates the overall strategic situation of the great rejuvenation of the Chinese nation and the great changes unseen in the world in a century, makes major strategic arrangements for the development of the cause of the party and the state, unites and leads the whole party, the army and the people of all ethnic groups throughout the country to effectively deal with the severe and complex international situation and the huge risks and challenges that follow one after another, and pushes forward socialism with Chinese characteristics in the new era with a spirit of enterprising spirit, and promote major achievements in the cause of the party and the state that have attracted worldwide attention.

Since the 18th National Congress of the Communist Party of China, socialism with Chinese characteristics has entered a new era. History is destined to remember this great and extraordinary 10 years--

In the past 10 years, the Party Central Committee with Comrade Xi Jinping as the core has held high the great banner of socialism with Chinese characteristics, fully implemented Xi Jinping's new era of socialism with Chinese characteristics, united and led the entire party, the entire army and the people of all ethnic groups in the country, and took a series of strategic measures to promote a series of transformative practices, achieve a series of breakthroughs, achieve a series of landmark results, and create the great achievements of socialism with Chinese characteristics in the new era, it is of milestone significance in the history of the party, the history of new China, the history of reform and opening up, the history of socialist development, and the history of the development of the Chinese nation.

In the past 10 years, we have adhered to and strengthened the party's overall leadership, coordinated the promotion of the "five in one" overall layout, coordinated the promotion of the "four comprehensive" strategic layout, adhered to and improved the socialist system with Chinese characteristics, and promoted the modernization of the national governance system and governance capabilities. Winning the battle against poverty, building a well-off society in an all-round way on schedule, achieving the first centenary goal, and starting a new journey of building a modern socialist country.

Over the past 10 years, we have persisted in leading the great social revolution with the party's great self-revolution, deeply promoted the comprehensive and strict administration of the party, persevered in the wind and discipline, and promoted the party's flesh-and-blood ties with the masses of the people. The continuous formation and development of a good political ecology within the party has provided a strong political guarantee for the development of various undertakings of the party and the state.

In the past 10 years, the great achievements created by the party under the leadership of the people have demonstrated the strong vitality of socialism with Chinese characteristics. The party's heart, the army and the people's heart are unprecedentedly united and excited. The Chinese nation has ushered in a great leap from standing up, getting rich to becoming strong, and realizing the Chinese nation The great rejuvenation has entered an irreversible historical process. unprecedented changes have taken place in the outlook of the party, the outlook of the country, the outlook of the people, the outlook of the army, and the outlook of the chinese nation.

The tide of the times and the leaders always create each other, and the historical process and the ideological process always agitate each other.

In the face of complex situations and risks and challenges rarely seen in the world and history, General Secretary Xi Jinping, with the grandeur, foresight, and magnificent strategy of Marxist statesmen, thinkers, and strategists, plans the overall situation at home and abroad, leads reform, development and stability, internal affairs, foreign affairs and national defense, governing the party, the country and the army, promptly puts forward major strategies, makes major decisions, and deploys major tasks, it fully demonstrated the political wisdom, strategic determination, mission responsibility, feelings for the people, and art of leadership of the leaders of the big party and the big country, and won the heartfelt support and love of the whole party, the whole army and the people of all ethnic groups throughout the country.

In advancing the great practice of socialism with Chinese characteristics in the new era, the Chinese Communists, with Comrade Xi Jinping as the main representative, insisted on combining the basic principles of Marxism with China's specific reality and with China's excellent traditional culture, and combining theory and practice. Answered a series of major issues of the times related to the overall development of the party and the country, scientifically answering the questions of China, the world, the people and the times, Xi Jinping's thought of socialism with Chinese characteristics in the new era was founded. Xi Jinping's thought of socialism with Chinese characteristics in the new era is contemporary Chinese Marxism and Marxism in the 21st century. It is the essence of Chinese culture and Chinese spirit, and has opened up a new realm of modernization of Marxism in China.

The great changes in the 10 years of the new era have revealed profound historical conclusions: the most fundamental reason for the historic achievements and historic changes in the cause of the party and the country is that General Secretary Xi Jinping is at the helm as the core of the Party Central Committee and the core of the whole party. It lies in the scientific guidance of Xi Jinping's new era of socialism with Chinese characteristics.

The great changes in the new era in the past 10 years are entrusted with the eager expectations of the times: standing at a new historical starting point, facing a more complex international environment, arduous and arduous domestic reform, development and stability tasks, to ensure the continuous development of the party's cause and the long-term stability of the country, We must firmly support the "two establishment" and resolutely achieve the "two maintenance", and maintain the long-term stability of the core of the Party Central Committee and the whole party. The core of the party, the leader of the people, and the commander-in-chief of the army, who have been tested by history, practice, and struggle, continue to take the helm and lead the voyage. It is the heart of the party, the hope of the people, and the hope of the people. It is also the great fortune of the party, the country, and the army. The great fortune of the people!

Who can lead the people to achieve the goal of becoming a powerful country, who can lead the people to promote the great cause of rejuvenation, history will choose whom, and the people will support whom--

In the election of the party's 20 representatives, Comrade Xi Jinping was elected unanimously. When electing members of the 20th Central Committee, Comrade Xi Jinping was elected unanimously. When the first Plenary session of the 20th CPC Central Committee elected the new central leading body, Comrade Xi Jinping was unanimously elected General Secretary of the Central Committee again.

One vote after another and applause after another embodies the common will of all deputies and committee members, reflects the heartfelt love of more than 9600 million party members for General Secretary Xi Jinping, and reflects the firm confidence of hundreds of millions of people to follow the leaders of the great rejuvenation to create a better future.

The sea is flowing across the river, and the mountains are majestic to see the main peak. The Communist Party of China, which shoulders the great historical mission, will unite and lead the entire party, the entire army and the people of all ethnic groups under the strong leadership of the Party Central Committee with Comrade Xi Jinping at the core, unite as one, forge ahead, create new miracles, and win new victories.

Forward-looking, committed to the selection of talents and talents

-- Focusing on the party's cause and the long-term stability of the country, the Party Central Committee with Comrade Xi Jinping as the core is planning the nomination of candidates for the new central leading body

 

On October 23, Xi Jinping, general secretary of the CPC Central Committee, who was just elected at the first plenary session of the 20th CPC Central Committee, and Li Qiang, Zhao Leji, Wang Huning, Cai Qi, Ding Xuexiang and Li Xi, members of the Standing Committee of the Political Bureau of the CPC Central Committee, met cordially with Chinese and foreign journalists covering the 20th CPC National Congress in the Great Hall of the People in Beijing. Photo by Xinhua News Agency reporter Shen Hong

The long river of history is surging forward, the great rejuvenation of the Chinese nation is ushering in a crucial journey, and the internal and external environment is also undergoing profound changes--

Looking at the world, the world's unprecedented changes in a century are accelerating, and the characteristics of world changes, times changes, and historical changes are more obvious.

Looking around the country, my country's development is facing new strategic opportunities, new strategic tasks, new strategic stages, new strategic requirements, and new strategic environment. The risks and challenges that need to be addressed, and the contradictions and problems that need to be resolved are more complicated than before.

The key lies in people.

At the critical moment of embarking on the new journey of building a modern socialist country in an all-round way and marching towards the second centenary goal, the whole party, the whole army and the people of all ethnic groups in the country have a common expectation, that is, to elect a united and strong central leadership group, under the leadership of General Secretary Xi Jinping, continue to consolidate achievements, overcome difficulties and forge ahead, effectively deal with various risks and tests, and overcome various difficulties and challenges on the road, successfully realize the goals and tasks of the new era and new journey.

How to create a new central leading body to lead China's giant ship to chop through the waves and make steady progress? This is highly concerned at home and abroad.

According to the provisions of the Party Constitution, the 20th CPC National Congress elected a new Central Committee and the Central Commission for discipline Inspection, and the first Plenary session of the 20th CPC Central Committee elected a new political Bureau, the standing Committee of the political Bureau of the CPC Central Committee and the General Secretary of the Central Committee.

"Our party is a big party with more than 9600 million party members. It is in power in a large country with a population of more than one billion. It has heavy burdens and responsibilities on its shoulders. It must form a politically firm, united, strong, and vigorous. Central leadership group." General Secretary Xi Jinping's words are far-sighted and meaningful.

A broad vision of the overall picture, deep thinking to guide the direction.

Under the overall planning of the Party Central Committee with Comrade Xi Jinping as the core, the preparation and nomination of candidates for the new central leadership has been carried out in an orderly manner.

Since the beginning of 2022, General Secretary Xi Jinping has carefully listened to the opinions of comrades of the Standing Committee of the Political Bureau of the Central Committee on how to prepare candidates for the new central leadership.

Everyone unanimously agreed that, on the basis of summarizing the relevant practices of the 17th and 18th National Congress of the Communist Party of China, we should adhere to the good experience and good practices of the 19th Central Leadership Organization's candidate preparation and the "two committees" candidate inspection work, and do not engage in "sea promotion". "Sea elections", adopt the method of conversation and investigation to form candidates for the new Politburo, Standing Committee, and Secretariat of the State Council, and the Central Military Commission, as well as the newly promoted candidates within the National People's Congress and the National Committee of the Chinese People's Political Consultative Conference, etc., face-to-face listening to recommend opinions and suggestions within a certain range.

On March 24, 2022, General Secretary Xi Jinping presided over a meeting of the Standing Committee of the Political Bureau of the Central Committee to conduct a special study, and discussed and approved the "Research Arrangement Plan for the Brewing Work of the Candidates for the New Central Leadership Agency." Talk research and candidate brewing work under the direct leadership of General Secretary Xi Jinping. Mainly follow the following principles:

Adhere to the guidance of Xi Jinping Thought on Socialism with Chinese Characteristics for a New Era, focus on the overall promotion of the "five in one" overall layout and the coordinated promotion of the "four comprehensive" strategic layout, based on the new development stage, implement the new development concept, build a new development pattern, Promote high-quality development, comprehensively build a modern socialist country, and realize the Chinese dream of the great rejuvenation of the Chinese nation; focus on fully implementing the general requirements of party building in the new era and the organizational line of the new era, we should adhere to and strengthen the party's overall leadership, improve the party's long-term ruling ability, maintain the party's advanced nature and purity, further promote the new great project of Party building in the new era with the spirit of self revolution, and constantly consolidate the party's ruling position; we should focus on the successor and prosperity of the party's cause, and ensure the long-term stability of the party and the country.

Adhere to the core position of the party's leadership, adhere to the authority of the Party Central Committee and centralized and unified leadership, improve the mechanism for the generation of party and state leaders, and actively and steadily select and match the new party and state leadership.

Adhere to the standards of the Marxist politician group, adhere to the all corners of the world, appoint people on their merits, adhere to both ability and political integrity, put morality first, adhere to career first, fairness and integrity, adhere to the standards of good cadres in the new era and the requirements of loyalty and clean responsibility, and strictly control politics. Accurate and scientific selection and employment.

Adhere to the principle of the party's management of cadres, implement democratic centralism, fully promote inner-party democracy, and improve the quality and effectiveness of democracy. The conversation research focuses on brainstorming and unified understanding, and does not limit the number of recommend. The number of votes is recommend for reference, and people are not simply selected by votes. Taking into account the overall situation of the work of the party and the state as a whole, we should study and propose candidates for the new central leading body according to the conditions of cadres, their consistent performance, and the needs of the team structure.

The new central leadership team should have a reasonable size and structure.

In accordance with these principles, the Central Committee has proposed the conditions for recommending candidates:

Political firmness, loyalty to the party, political judgment, political understanding, and strong political execution, deeply understand the decisive significance of the "two establishments", strengthen the "four consciousnesses", strengthen the "four confidences", and achieve the "two" Maintain ", resolutely maintain a high degree of consistency with the Party Central Committee with Comrade Xi Jinping at the core in ideological and political actions, and is a qualified Marxist politician.

Strong leadership ability, rich practical experience, strong revolutionary dedication, reform and innovation and the spirit of seeking truth from facts, adhere to principles, dare to take responsibility, strong struggle spirit, dare to fight, good at struggle, have a correct view of political achievements, and outstanding work performance.

Strictly implement democratic centralism, be fair and upright, have a broad mind, be good at uniting comrades, keep in mind the original mission, consciously implement the party's mass line, carry forward the party's glorious tradition and fine style, and serve the people wholeheartedly.

Strictly abide by the party's discipline and rules, abide by the eight regulations of the Central Committee and the code of honesty and self-discipline, have good moral cultivation, be honest and clean, and have a high prestige and a good image both inside and outside the party.

On this basis, in accordance with the needs of the development of the party and the country and the actual construction of the central leadership, and with reference to previous practices, the central government has put forward clear requirements for the scope, age and structure of recommended candidates.

During the conversation and investigation, everyone agreed that the Party Central Committee's principles on the preparation of candidates for the new central leadership agency are clear-cut and focused. The standard conditions for candidates are clear and clear, and the guidance is clear. The scope of recommend, age leverage and structural requirements are scientific, reasonable and in line with reality, which fully reflects the foresight and foresight of the Party Central Committee.

 

Scientific Democracy, Broad Consensus

-The selection of candidates for the new central leadership fully reflects our party's fine tradition and style of fully promoting democracy and being good at concentrating the wisdom of the whole party, and demonstrates the significant advantages and valuable experience of the party in selecting and appointing talents for a century.

 

 

On October 23, Xi Jinping, general secretary of the CPC Central Committee, who was just elected at the first plenary session of the 20th CPC Central Committee, and Li Qiang, Zhao Leji, Wang Huning, Cai Qi, Ding Xuexiang and Li Xi, members of the Standing Committee of the Political Bureau of the CPC Central Committee, met cordially with Chinese and foreign journalists covering the 20th CPC National Congress in the Great Hall of the People in Beijing. This is Xi Jinping and so on in the warm applause into the hall. Photo by Xinhua News Agency reporter Zhai Jianlan

Early summer morning in 2022, Zhongnanhai, Beijing.

Just after 7 o'clock, a leading cadre at the provincial and ministerial level came here early to prepare for a serious and solemn conversation. Two days ago, he was informed to enter Beijing and came to Zhongnanhai before he knew the content of the conversation and research.

In the waiting room, he carefully read several materials on the table: "Relevant Arrangements for Conversation and Research", "List of Party Members and Comrades of Current Party and State Leaders", "List of Party Members and Leading Cadres at the Provincial and Ministerial Level"...

At 9 a.m., the conversation officially began. The leading comrades of the central government had face-to-face exchanges with the comrades participating in the talks, and carefully listened to the opinions and suggestions on the candidates for the new central leadership.

This is a vivid scene in the investigation and study of the brewing work of candidates for the central leading bodies.

Beginning in April 2022, General Secretary Xi Jinping specially arranged time to talk with the current members of the Political Bureau of the Central Committee, the secretary of the Secretariat of the Central Committee, the vice chairman of the state, and the members of the Central Military Commission under the circumstances of daily management. 30 people.

According to the arrangement of the Standing Committee of the Political Bureau of the Central Committee, from April to July 2022, relevant leading comrades of the Central Committee listened to the current state agencies and other party members of the National Committee of the Chinese People's Political Consultative Conference, the main responsible comrades of party members of the central and ministerial-level units of the central and state agencies, provinces, regions and municipalities The opinions of the chief party and government officials, commanders and political commissars of the military theaters and other 283 other members of the 19th Central Committee. The responsible comrades of the Central Military Commission respectively listened to the opinions of the current leading comrades in the theater and the main responsible comrades of the theater-level departments of the Military Commission on the selection of the Central Military Commission.

Through talks and research, listening to opinions, repeated deliberation, meeting decisions and other procedures, gradually brewing to produce candidates for the central leadership. The whole process of selecting candidates fully reflects the continuous improvement of the mechanism for the generation of party and state leaders, and shows the maturity, self-confidence and broad mind of our party.

This process is a process of adhering to the organic unity of strengthening the party's leadership and fully carrying forward inner-party democracy--

The selection of candidates for the central leadership is a key and fundamental issue related to the overall development of the party and the country.

In selecting and employing personnel, the party organization must strengthen its leadership and ensure that it is well guarded. General Secretary Xi Jinping profoundly pointed out: "the party's leadership and democracy are unified, not antagonistic, and the two should not be neglected, and we must not simply take people by votes." our party has rich experience and has a complete system, and the standards and procedures for selecting and employing personnel have been tempered and perfected ".

Comrades who participated in the conversation and survey said one after another that the leading comrades of the CPC Central Committee have invested so much precious time and energy to fully listen to opinions on such a large scale, which reflects the great importance attached by General Secretary Xi Jinping and the CPC Central Committee to the selection of candidates for the new central leading body. It reflects the high trust in us, and is very moved and excited in my heart. I must be serious and responsible and seek truth from facts to talk about my opinions and suggestions.

"The whole conversation process is not limited in time, nor is there a limit on the number of recommended people. You can talk about as much as you want, and you can recommend whoever you think is excellent and competent, including any good opinions and suggestions on the construction of the new central leadership." A interviewee said with emotion, "this kind of conversation atmosphere is very relaxed, and there is sufficient time to read the materials in advance and think and prepare. We all open our hearts and talk frankly about our opinions and ideas."

Some comrades read the materials repeatedly in the waiting room and drew up an outline of the conversation. Some comrades not only recommend candidates, but also introduce their performance and examples in detail. After the conversation, some comrades added their opinions by making phone calls, writing letters, etc......

The right people are expensive. Everyone fully affirmed this conversation and research, and agreed that it is very good not to engage in "sea push" or "sea election" for the preparation of candidates for the new central leading body. It is very good to adopt the method of conversation and research and face-to-face listening to opinions. The opinions reflected are more comprehensive and more real. It is a higher quality and more effective democracy and a good method of scientific democracy.

  This process is a process of adhering to standards and selecting talents--

General Secretary Xi Jinping emphasized that the selection of candidates for the central leadership agency must put political standards in the first place, strictly control politics, and keep the bottom line of integrity.

"The members of the central leading body shoulder the important task of the times and place the high hopes of hundreds of millions of people. They must be measured according to the standards of Marxist politicians." During the conversation and investigation, everyone agreed that the members of the new central leadership should be politically strong, loyal to the party, strong in political judgment, political understanding, and strong in political execution. They are firm supporters of the "two establishments" and "two The conscious practitioner of" maintenance.

"The leadership positions of the party and the state are not" iron chairs ", and those who meet the age do not necessarily continue to be nominated. We should adhere to the principle of career-oriented, and according to the needs of the work, the conditions of the candidates, the integrity and the reputation of the image, we should be able to retain and transfer, and be able to go up and down, so as to establish a clear employment orientation in the new era." In the conversation survey, many interviewees expressed such opinions.

Whether they dare to take responsibility, have the courage to fight, and have the ability to lead the modernization drive is an important consideration for many comrades to recommend candidates. Everyone said: "In the next five years, the tasks of reform, development and stability will be arduous and arduous, and the risks and challenges will be severe and complex. It is necessary to build a leadership group that can overcome difficulties, attack cities and pull out villages, and climb over hurdles."

The conversation survey is not only a test and party spirit education for the participants, but also a vivid practice for senior leading cadres to participate in the political life of the party. Many comrades said that the discipline requirements and confidentiality requirements of this conversation and investigation are very strict, and the whole conversation and investigation process is clean and upright, demonstrating the remarkable results of comprehensively and strictly administering the party in the new era.

This process is a process of strictly following the system and procedures--

Based on the opinions and suggestions of all parties, General Secretary Xi Jinping conducted serious communication and repeated deliberations with comrades of the Standing Committee of the Political Bureau of the Central Committee on the composition principles and composition plans of the new central leadership. After the preliminary plan was formed, General Secretary Xi Jinping once again listened to the opinions of the Standing Committee of the Political Bureau of the Central Committee, members of the Political Bureau of the Central Committee, and members of the Secretariat of the Central Committee. On this basis, the composition of the new central leading body is proposed.

The proposal for the selection of leading members of the new Central Commission for Discipline Inspection is proposed to the Party Central Committee by the Central Commission for Discipline Inspection, the Central Organization Department and other relevant parties after deliberation and discussion. The proposal for the composition of the new Central Military Commission is proposed by the Central Military Commission to the Party Central Committee after collective discussion.

On September 28, 2022, the Standing Committee of the Political Bureau of the Central Committee studied and discussed the proposed list of candidates for the new central leadership. On September 29, the Politburo meeting of the Central Committee reviewed and approved this list of recommendations, and decided to submit it to the First Plenary Session of the 20th Central Committee of the Party and the First Plenary Session of the Central Commission for Discipline Inspection for election, approval, and decision respectively.

 

make great efforts to write a new chapter

-- The new central leading body brings together outstanding ruling backbones from all aspects of the party, and they will lead the whole party, the whole army and the people of all ethnic groups throughout the country to take a new road to the examination. Chinese Dream, who strives unremittingly for building a modern socialist country in an all-round way and realizing the great rejuvenation of the Chinese nation.

 

Career and dreams are inherited here, and struggle and struggle are relayed here--

On October 22, the 20th National Congress of the Communist Party of China elected a new Central Committee and the Central Commission for Discipline Inspection.

On October 23, the first plenary session of the 20th CPC Central Committee elected a new central leading body.

This is a leading collective that condenses the will of the whole party, reflects the expectations of the people, and deserves the full trust of the whole party, the whole army and the people of all ethnic groups in the country--

Members of the new central leading body, in line with the standards of Marxist politicians, take the lead in supporting the "two establishment", strengthening the "four consciousness", strengthening the "four self-confidence" and achieving the "two maintenance". They can adapt to the needs of continuing to promote the overall layout of the "five in one" and the strategic layout of the "four comprehensive" in a coordinated way, have a strong ability to lead the modernization construction, dare to take responsibility and dare to struggle, he has rich leadership experience and mass work skills, is the backbone of the party in all aspects, and has high prestige among cadres and masses.

This is a leading collective with good quality and reasonable structure, which meets the needs of the long-term development of the cause of the party and the state--

The political Bureau of the 20th CPC Central Committee is composed of 24 comrades who are familiar with all aspects and fields of work, all of whom have high academic qualifications and professional knowledge, have a relatively reasonable structure, and have a wide range of members, including those working in local areas, some in central and state organs, and some in the army. Among them, 11 comrades were continuously nominated by members of the Political Bureau of the 19th Central Committee, 2 comrades were nominated for transfer, and 11 comrades were newly promoted.

This is a leading collective that inherits the past and ushers in the future, and leads the Chinese nation to a great rejuvenation--

The proportion of advance and retreat of the new central leading body is relatively appropriate, maintaining the continuity of personnel and work, and a group of leading cadres with both ability and political integrity and strong youth have entered the new central leading body, which fully reflects that our party's cause has successors and prosperity.

When the new central leading body was preparing candidates and soliciting opinions, some leading comrades of the party and the state took the interests of the party and the people as the most important, and in the spirit of being highly responsible for the development of the country and the rejuvenation of the nation, they took the initiative to step down and let relatively young comrades come up, showing the broad-mindedness and high-mindedness of the Communists.

In the past, there have been thousands of highlights, and the Ming Dynasty has even entered a hundred-foot pole.

At about 12: 00 on October 23, 2022, the golden hall of the great hall of the people was full of lights and the atmosphere was warm. Xi Jinping, General Secretary of the 20th Central Committee of the Communist Party of China, and Li Qiang, Zhao Leji, Wang Huning, Cai Qi, Ding Xuexiang, and Li Xi, members of the Standing Committee of the Political Bureau of the Central Committee, entered the hall and met cordially with Chinese and foreign reporters covering the 20th National Congress of the Party.

Under the camera and flashing lights, the central leading comrades are vigorous and calm. General Secretary Xi Jinping smiled and waved to everyone, and the audience burst into applause.

Subsequently, General Secretary Xi Jinping went to the speaking platform and, on behalf of the new central leadership members, sincerely thanked all comrades in the party for their trust, saying that they must keep in mind the nature and purpose of the party, keep in mind their mission and responsibilities, perform their duties, work diligently, and live up to the party. And the people's trust. General Secretary Xi Jinping pointed out that on the new journey, we must always maintain a high-spirited and enterprising spirit, always insist on doing everything for the people and relying on the people, always promote the party's self-revolution, and always promote the common values of all mankind. General Secretary Xi Jinping stressed that the new journey is an expedition full of glory and dreams. The blueprint has been drawn and the horn has been sounded. We must move forward vigorously and bravely and strive to create a brighter tomorrow.

This is not only the self-confidence of the navigator of the new era, the responsibility of the helm of the new journey, but also the guidance of the century-old party to renew its chapter, and the hope of the great nation's rejuvenation.

The long wind is mighty and the tide of the century, and the mainstay is this peak.

The new central leadership group with Comrade Xi Jinping at the core will surely lead the entire party, the entire army, and the people of all ethnic groups in the country to firmly embark on a new road to rush for exams, and unite and strive for the comprehensive construction of a modern socialist country and the comprehensive promotion of the great rejuvenation of the Chinese nation. Let the Chinese nation stand in the forest of the world's nations in a more vigorous manner in the new era and new journey!

The heavy responsibility is on the shoulders and the light is ahead. The party will unite and lead the people to create a century of glory, and it will also unite and lead the people to write the great cause of the future!

Related News

Under the background of high-quality development, how will the road and bridge industry develop?

In the first year of the 14th Five-Year Plan, China's economy has entered a stage of high-quality development, transforming the mode of economic development, optimizing the economic structure, transforming the driving force of economic growth, and realizing the structural transformation from medium and low-end industries to medium and high-end industries is the theme of economic development for a long time in the future. With the gradual decline of the marginal utility of investment in economic pull, and the proposal of the new development pattern of "double cycle", China's economic growth drive is gradually changing from investment-driven to consumption-driven, therefore, the future investment growth rate of the construction industry will inevitably slow down further. As an important part of the construction industry, the road and bridge engineering construction industry plays a very important role in maintaining the normal operation of social production, circulation, distribution, and consumption, ensuring the sustained, rapid and healthy development of the national economy, improving people's living standards, and promoting the modernization of national defense. However, with the continuous improvement of the highway network and national and provincial highways, the market space of the road and bridge industry is under pressure, and the competition is becoming increasingly fierce. In the future, there are five main trends in the development of the road and bridge industry: First, industrial chain extension and related diversification are effective ways to deal with growth bottlenecks. The upstream and downstream expansion of the industrial chain includes the mining and manufacturing of upstream raw materials, downstream real estate, operation, and EPC construction general contracting. The related diversified development mainly extends to rail transit, water conservancy, environmental protection, maintenance engineering and other fields. Second, the concentration of the industry continues to increase, and market competition is further intensified. The market concentration of the construction industry is low and there are many players. However, with the further deepening of the marketization of the industry and the deterioration of the international environment, large and medium-sized enterprises such as central enterprises and provincial state-owned enterprises have begun to enter the city to seize the regional market and hinder the industry from breaking through. The influencing factors of geographical restrictions have been continuously weakened, the cross-regional competition of the industry has become increasingly significant, and the market concentration is expected to continue to increase. Third, the growth of the eastern market space is limited, and the western market has more room for development. With the low density of road network in the western region and the promotion of relevant policy factors such as the large-scale development of the western region and "Belt and Road Initiative", the investment in infrastructure construction in the western region is gradually strengthening and has become a key area for domestic highway construction. Fourth, intelligent transportation has become a new bright spot in the field of highway construction. Driven by technologies such as ultra-high-speed wireless local area network and 5G mobile communication, smart transportation will be greatly developed in the future. Fifth, the qualification reform promotes the road and bridge enterprises to enhance the degree of marketization and comprehensive strength. In March 2020, the Measures for the Administration of Engineering Cost Consulting Enterprises and the Measures for the Administration of Registered Cost Engineers proposed to lower the qualification threshold for cost enterprises. In July 2020, the Ministry of Housing and Construction issued the Framework of Qualification Standards for Construction Engineering Enterprises (Draft for Comments), proposing to significantly reduce the qualification categories and grades of enterprises. Lowering the entry threshold for the construction industry will further promote road and bridge enterprises to change the traditional concept of "waiting and relying on, really improve the construction ability, technical strength and management ability.


2023-10-17

Analysis and Solution Summary of Common Faults of Smearing Machine

1. Smoke from the smoothing machine when working Check the trowel machine to check whether there is too much oil. If there is too much oil, release part of it. It can also be that the piston is broken and severely worn and will burn the oil. If it is damaged, it needs to be replaced in time. Check the engine. If the engine is not faulty, it may also be that there are too many impurities in the oil. The oil is very important. Try to choose high-quality oil. When buying, you must pay attention to prevent buying inferior fake oil. 2. How to level the chassis screws of the smoothing machine First replace 4 new blades and put the trowel in a particularly flat place. Then remove the shift fork and visually inspect whether the heights of the four screws are consistent. If conditions permit, measure them with a ruler. If the heights are inconsistent, adjust them to be consistent. When the gland is gently shaken, if there is no shaking, the debugging is proved successful. Put some butter on the top of the screw to prevent wear. 3. The wiping machine always stalls Observe whether the oil level is normal and whether the oil is too little. Some machines have their own oil protection system, which will automatically turn off when there is a shortage of oil. There is also the fact that after the remote flameout switch and the flameout switch of the machine are disconnected one by one, if the flameout phenomenon does not occur again, it means that there is grounding in that part. Just check and eliminate it carefully. 4. The engine of the trowel is normal, but the trowel is not moved. If there is no problem with the engine, it is caused by the wrong belt type or the belt is too long. If there is still an abnormality, it can be handled by changing a clutch. 5. The gasoline polish machine was blistered First clean the carburetor, let the spark plug be removed to see if there is water in the cylinder head. If there is water, pull the disk several times to drain the water. Try again after changing the oil to see if it is normal. 6. The smoothing machine cannot rotate Reason: The blade may be deformed; the motor bearing is broken; the motor bracket is not fixed well; there is a problem in use.


2023-10-16

Method of polishing and grinding

Method of polishing grinding: Grinding is the grinding tool (hereinafter referred to as the grinding tool) surface embedded abrasive or coated abrasive and add lubricant, under certain pressure, the tool and the grinding tool contact and do relative movement, through the abrasive action, from the workpiece surface cut a layer of very thin chip, so that the workpiece has a precise size, accurate geometry and high surface roughness. Its essence is to use free abrasive particles to carry out micro-cutting including physical and chemical comprehensive effects on the surface of the workpiece through the grinding tool. Features:(1) In mechanical grinding, the machine tool-tool-workpiece system is in an elastic floating state. (2) The workpiece to be ground is not subject to any force and is therefore in a free state. (3) The speed of the grinding movement is usually below 30 m/min, which is about 1% of the grinding speed. (4) When grinding, only a very thin layer of material can be cut off, so the heat generated is less, the processing deformation is small, and the surface deterioration layer is also thin. (5) There is residual compressive stress on the grinding surface, which is beneficial to improve the fatigue strength of the workpiece surface. (6) The operation is simple and generally does not require complicated and expensive equipment. (7) Adaptability is good. (8) grinding can obtain very low surface roughness. 1. Fluid polishing Fluid polishing is to rely on high-speed flow of liquid and abrasive particles to wash the surface of the workpiece to achieve the purpose of polishing. Commonly used methods are: abrasive jet processing, liquid jet processing, fluid power grinding. Fluid power grinding is driven by hydraulic pressure, The liquid medium carrying the abrasive particles is caused to flow back and forth at high speed over the surface of the workpiece. The medium mainly uses special compounds with good flowability at lower pressure. (polymer-like substance) and mixed with abrasive, abrasive can be used silicon carbide powder. 2. Mechanical polishing Mechanical polishing is a method of polishing a smooth surface by cutting and plastic deformation of the surface of the material to remove the convex part after polishing, Generally use oilstone, wool wheel, sandpaper, etc., mainly manual operation, special parts such as the surface of the rotary body, Auxiliary tools such as turntables can be used, and the method of super-lapping can be used for high surface quality requirements. Super lapping is a special abrasive tool, In the polishing liquid containing abrasives, it is tightly pressed on the surface of the workpiece to be processed for high-speed rotating motion. Using this technology, the surface roughness of Ra0.008 μm can be achieved, which is the highest among various polishing methods. Optical lens molds often use this method. 3. Ultrasonic polishing The workpiece is placed in the abrasive suspension and placed together in the ultrasonic field, relying on the oscillation of the ultrasonic, The abrasive is ground and polished on the surface of the workpiece. Ultrasonic machining macro force is small, will not cause deformation of the workpiece, but tooling production and installation is difficult. Ultrasonic machining can be combined with chemical or electrochemical methods. On the basis of solution corrosion and electrolysis, ultrasonic vibration is applied to stir the solution, The dissolution products on the surface of the workpiece are separated, and the corrosion or electrolyte near the surface is uniform; Ultrasonic cavitation in the liquid can also inhibit the corrosion process, conducive to surface brightening. 4. Electrolytic polishing The basic principle of electrolytic polishing is the same as chemical polishing, that is, by selectively dissolving the small protruding parts of the surface of the material, Make the surface smooth. Compared with chemical polishing, the effect of cathode reaction can be eliminated, and the effect is better. The electrochemical polishing process is divided into two steps: (1) Macroscopic leveling dissolution products diffuse into the electrolyte, and the geometric roughness of the material surface decreases, Ra> 1μm. (2) micro light level anode polarization, surface brightness, Ra <1μm. 5. Fluid polishing Fluid polishing is to rely on high-speed flow of liquid and abrasive particles to wash the surface of the workpiece to achieve the purpose of polishing. Commonly used methods are: abrasive jet processing, liquid jet processing, fluid power grinding. Fluid power grinding is driven by hydraulic pressure, The liquid medium carrying the abrasive particles is caused to flow back and forth at high speed over the surface of the workpiece. The medium is mainly made of special compounds (polymer-like substances) with good flowability at lower pressure and mixed with abrasives, The abrasive may use silicon carbide powder. 6. Chemical polishing Chemical polishing is to make the surface of the material in the chemical medium micro convex part of the concave part of the preferential dissolution, A smooth surface is thus obtained. The main advantage of this method is that it does not require complex equipment and can polish workpieces with complex shapes, Many workpieces can be polished at the same time with high efficiency. The core problem of chemical polishing is the preparation of polishing solution. Surface roughness obtained by chemical polishing Generally, it is several 10 μm. 7. Magnetic grinding and polishing Magnetic grinding and polishing is the use of magnetic abrasive under the action of a magnetic field to form an abrasive brush to grind the workpiece. This method has high processing efficiency, Good quality, easy control of processing conditions, good working conditions. With suitable abrasives, the surface roughness can reach Ra0.1 μm. The polishing in plastic mold processing is very different from the surface polishing required in other industries, Strictly speaking, the polishing of the mold should be called mirror processing. It not only has the very high request to the polishing itself but also to the surface flatness, There are also high standards for smoothness and geometric accuracy. Surface polishing is generally only required to obtain a bright surface. The standard of mirror processing is divided into four levels: AO = Ra0.008μm, A1 = Ra0.016μm, A3 = Ra0.032μm, A4 = Ra0.063 μm, due to electrolytic polishing, fluid polishing and other methods are difficult to accurately control the geometric accuracy of the part, The surface quality of chemical polishing, ultrasonic polishing, magnetic grinding polishing and other methods can not meet the requirements, so the mirror processing of precision molds Or mainly mechanical polishing.


2023-10-12

What does the floor grinder floor grinder inverter display oL2 mean? Why can't the machine start? How to solve?

The situation is as follows: 1. The ground is very uneven, the resistance of the grinding disc is large, and the motor load is too heavy. 2. If this situation occurs when the new machine is used for the first time, it means that the governor has been adjusted to the fastest speed position, or the new grinding plate (block) Not open rough pressure on the rough hard surface, resulting in a large disc resistance, motor load is too heavy. 3. If the gearbox is repaired and the machine is initially tested like this, it may be that the gear assembly is not smooth and too tight, causing the grinding disc to rotate manually. It is not smooth, or the motor shaft and the center gear are not concentric after the motor is fixed during assembly, that is, the rotation is not concentric, which makes the electricity The rotation of the rotor is blocked and Caton occurs. Corresponding solution: 1, the machine up, move to a relatively flat ground area grinding, and then slowly cut into the uneven ground area, or use Other small grinding disc machinery will ground the rough surface of the potholes slightly smooth, and then use the machine to grind. 2. Roughen the grinding piece (block) on the cement floor. Press down on the armrest and raise the starter of the machine (make the grinding disc slightly off the ground). The machine (grinding disc) can be slowly landed. 3. Reassemble the gear or reassemble the motor to make the gear and the grinding disc rotate smoothly. After inserting the motor shaft into the central gear Concentric, suspend the motor and the box and energize the motor to start the motor, so that the motor, gear and grinding disc rotate smoothly. After shutdown, hand Rotate the grinding disc smoothly.


2023-10-09