Hello! Welcome to Guangzhou Qing Qin Yu Environmental Technology Co., Ltd.  website!

CHINESE    |    Online Message     |     Map

CASES

CASES

Check category

CONTACT

Home

Guangzhou Qing Qin Yu Environmental Technology Co., Ltd.

Add

Room 1010, South Tower, Xindacheng Plaza, No. 27, erheng Road, Shuiyin Road, Yuexiu District, Guangzhou

业务

+86-13925069066 Manager Wu

Some matters needing attention in daily use of floor grinder

  • Categories:Common problem
  • Author:
  • Origin:
  • Time of issue:2019-09-24 11:22
  • Views:9

(Summary description)I.thegearoilmustbechangedafterthefirst1000hoursofuseofallgearboxes,andthenthegearoilshallbechangedeveryyear;   Symptom:theinternalorgansofthegearboxarecausedbyironfragmentsduetoarunninginprocessrequiredforthefirstuse.   II.Allgearboxesshallbehandledwithcarewhenreplacinggrindingdiscsandhandling;   III.allgearboxesmustbecleanedaftereachwork,andtheservicelifeofthefloorgrinderandoilsealcanbeextended.   IV.checkwhethertheoillevelofthegearboxisnormalfrequently,andifnot,additintime;(availableoilbardetection)   V.payattentiontopreventwaterfromenteringthefrequencyconverterandmotorwhenaddingwater;   6.Correctvoltageshallbeintroducedtothemachine;   VII.Ifthereisanyabnormalnoiseinthegearbox,itmustbestoppedimmediatelyandthecausechecked.Continuedusewillcausedamagetootherpinioncomponents.

Some matters needing attention in daily use of floor grinder

(Summary description)I.thegearoilmustbechangedafterthefirst1000hoursofuseofallgearboxes,andthenthegearoilshallbechangedeveryyear;   Symptom:theinternalorgansofthegearboxarecausedbyironfragmentsduetoarunninginprocessrequiredforthefirstuse.   II.Allgearboxesshallbehandledwithcarewhenreplacinggrindingdiscsandhandling;   III.allgearboxesmustbecleanedaftereachwork,andtheservicelifeofthefloorgrinderandoilsealcanbeextended.   IV.checkwhethertheoillevelofthegearboxisnormalfrequently,andifnot,additintime;(availableoilbardetection)   V.payattentiontopreventwaterfromenteringthefrequencyconverterandmotorwhenaddingwater;   6.Correctvoltageshallbeintroducedtothemachine;   VII.Ifthereisanyabnormalnoiseinthegearbox,itmustbestoppedimmediatelyandthecausechecked.Continuedusewillcausedamagetootherpinioncomponents.

  • Categories:Common problem
  • Author:
  • Origin:
  • Time of issue:2019-09-24 11:22
  • Views:9
Information
I. the gear oil must be changed after the first 1000 hours of use of all gear boxes, and then the gear oil shall be changed every year;
 
 
 
Symptom: the internal organs of the gearbox are caused by iron fragments due to a running in process required for the first use.
 
 
 
II. All gearboxes shall be handled with care when replacing grinding discs and handling;
 
 
 
III. all gear boxes must be cleaned after each work, and the service life of the floor grinder and oil seal can be extended.
 
 
 
IV. check whether the oil level of the gearbox is normal frequently, and if not, add it in time; (available oil bar detection)
 
 
 
V. pay attention to prevent water from entering the frequency converter and motor when adding water;
 
 
 
6. Correct voltage shall be introduced to the machine;
 
 
 
VII. If there is any abnormal noise in the gearbox, it must be stopped immediately and the cause checked. Continued use will cause damage to other pinion components.

Scan the QR code to read on your phone

Copyright © Guangzhou Qing Qin Yu Environmental Technology Co., Ltd. All Rights Reserved 粤ICP备12071081号